01 / OVERVIEW
Product Specifications
Thickness Range
0.02–4.0
mm
Max Width
1800
mm
Anodization Layer
1–25+
μm
Alloy Series
1 / 3 / 5 / 6
15 grades available
Anodizing Type
Type II
Sulfuric Acid
Annual Capacity
150K
metric tons
In-stock widths: 1200mm / 1220mm / 1250mm / 1500mm — Custom widths available up to 1800mm on request
02 / MATERIAL
Chemical Composition (%)
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Cr | Al (min) | Series |
|---|---|---|---|---|---|---|---|---|---|
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.05 | — | 99.50 | 1xxx |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | — | 99.60 | 1xxx |
| 1070 | 0.20 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | — | 99.70 | 1xxx |
| 1085 | 0.10 | 0.12 | 0.03 | 0.02 | 0.02 | 0.03 | — | 99.85 | 1xxx |
| 1090 | 0.07 | 0.09 | 0.02 | 0.02 | 0.02 | 0.02 | — | 99.90 | 1xxx |
| 1100 | 0.55 | 0.50 | 0.05-0.20 | 0.05 | — | 0.10 | — | 99.00 | 1xxx |
| 1200 | 0.50 | 0.50 | 0.05 | 0.05 | — | 0.10 | — | 99.00 | 1xxx |
| 3003 | 0.60 | 0.70 | 0.05-0.20 | 1.0-1.5 | — | 0.10 | — | Rem. | 3xxx |
| 3004 | 0.30 | 0.70 | 0.25 | 1.0-1.5 | 0.8-1.3 | 0.25 | — | Rem. | 3xxx |
| 5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.5-1.1 | 0.25 | 0.10 | Rem. | 5xxx |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.10 | 0.15-0.35 | Rem. | 5xxx |
| 5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6-3.6 | 0.20 | 0.30 | Rem. | 5xxx |
| 5083 | 0.40 | 0.40 | 0.10 | 0.40-1.0 | 4.0-4.9 | 0.25 | 0.05-0.25 | Rem. | 5xxx |
| 6061 | 0.40-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.25 | 0.04-0.35 | Rem. | 6xxx |
| 6063 | 0.20-0.6 | 0.35 | 0.10 | 0.10 | 0.45-0.9 | 0.10 | 0.10 | Rem. | 6xxx |
Reference: ASTM B209 / EN 573-3. Values are maximums unless a range is specified. 1100 / 1200: Si + Fe combined limit (≤ 0.95 / ≤ 1.00) per ASTM B209. Custom alloys available on request.
03 / MECHANICAL
Mechanical Properties (Typical)
| Alloy | Temper | Tensile (MPa) | Yield (MPa) | Elong. A50 (%) | Hardness (HV) | Primary Application |
|---|---|---|---|---|---|---|
| 1050 | H14/H24 | 95-135 | ≥75 | 2-6 | 32-38 | General forming, signage |
| 1060 | H14/H24 | 90-130 | ≥70 | 3-6 | 30-36 | Electrical, chemical |
| 1070 | H14 | 85-125 | ≥65 | 3-6 | 28-34 | Lithography, reflectors |
| 1085 | H14/H24 | 80-115 | ≥60 | 4-8 | 25-32 | Nameplates, decorative trim |
| 1090 | H14 | 75-110 | ≥55 | 5-10 | 23-30 | High-purity applications |
| 1100 | H14/H24 | 110-150 | ≥85 | 3-7 | 32-40 | Sheet metal, general purpose |
| 1200 | H14/H24 | 100-140 | ≥80 | 3-7 | 30-38 | General purpose, packaging |
| 3003 | H14/H24 | 140-180 | ≥115 | 2-5 | 40-48 | Roofing, gutters, HVAC |
| 3004 | H34/H36 | 190-230 | ≥160 | 3-6 | 48-55 | Packaging, housing panels |
| 5005 | H14/H34 | 150-195 | ≥120 | 3-6 | 40-48 | Architectural cladding |
| 5052 | H32/H34 | 230-290 | ≥180 | 4-8 | 55-68 | Marine, appliances |
| 5754 | H22/H24 | 220-280 | ≥170 | 5-10 | 52-65 | Vehicle body, flooring |
| 5083 | H111/H116 | 275-350 | ≥200 | 8-16 | 70-90 | Marine, shipbuilding |
| 6061 | T4/T6 | 260-310 | ≥240 | 8-12 | 70-95 | Structural, profiles |
| 6063 | T5/T6 | 215-250 | ≥180 | 8-12 | 60-80 | Extrusions, window frames |
Typical values for guidance only. Actual properties depend on temper, thickness, and production batch. Certified MTC provided with each shipment.
04 / ANODIZING
Anodizing Specifications
| Parameter | Specification | Standard |
|---|---|---|
| Anodizing Type | Type II — Sulfuric Acid Anodizing | MIL-A-8625 Type II |
| Coating Thickness | 1 – 25+ μm (custom on request) | ISO 7599 / MIL-A-8625 |
| Sealing Method | Hot water / Nickel acetate / Fluorozirconate | ISO 2931 (admittance test) |
| Coating Hardness | Mohs 9 / 300–500 HV (anodic layer) | ASTM B580 |
| Color Consistency | Controlled bath temperature + current density | Internal QA |
| Color Range | Clear, bronze (light-dark), black, gold, champagne, copper, custom | Any color on request |
| UV Resistance | Excellent — anodic oxide does not fade or chalk | Outdoor rated |
| Corrosion Resistance | Excellent — aluminum oxide is chemically inert | ASTM B117 salt spray |
05 / SURFACE
Available Finishes
▢
Mill Finish
As-rolled, untreated
≡
Brushed / Hairline
Satin directional pattern
◆
Mirror / Polished
High-gloss reflective
◍
Sandblasted
Matte non-directional
▦
Embossed
Stucco, diamond, custom
◑
PVDF Coated
Fluorocarbon topcoat
◉
Powder Coated
Electrostatic spray
▤
Sublimation
Wood grain thermal transfer
06 / COLOR
Anodized Color Range
Clear / Natural
Light Bronze
Medium Bronze
Dark Bronze
Black
Gold
Champagne
Copper
+ Custom Colors
Anodic colors are integral to the oxide layer — not a surface coating. They will not peel, chip, or fade. Color matching available for large-volume orders.
07 / DIMENSIONAL
Dimensional Tolerances
| Parameter | Range | Tolerance | Standard |
|---|---|---|---|
| Thickness | 0.02 – 0.50mm | ±0.005mm | ASTM B209 |
| Thickness | 0.50 – 1.00mm | ±0.01mm | ASTM B209 |
| Thickness | 1.00 – 4.00mm | ±0.02mm | ASTM B209 |
| Width | Up to 1800mm | +3 / -0mm | ASTM B209 |
| Flatness | All widths | ≤ 6mm / 1000mm | Internal QA |
| Coil ID | Standard | 508mm / 610mm | Custom on request |
| Coil Weight | Standard | 2 – 8 tons | Custom on request |
| Edge | Standard | Trimmed / mill edge | Slit edge available |
08 / PACKAGING
Packaging & Delivery
| Parameter | Specification |
|---|---|
| Packing Method | Standard export — wooden pallet + steel strapping + moisture barrier |
| Eye Orientation | Eye-to-sky or eye-to-wall (per customer request) |
| Surface Protection | PE film lamination or interleaving paper (optional) |
| Custom Packaging | Neutral or branded with customer logo (with signed authorization) |
| Labeling | Heat No., alloy, temper, dimensions, net/gross weight, batch ID |
| Container Loading | 20ft / 40ft — approx. 18-26 tons per 20ft |
| Lead Time | Ready stock: ships on confirmation · Standard specs: ~7 days · Custom: 15–50 days |
| Incoterms | EXW, FOB, CIF, DDP — all Chinese ports |
| MOQ | 3 tons per alloy/temper for custom orders — no MOQ for ready-stock items |
| Samples | Available within 1-7 days depending on complexity |
09 / CERTIFIED
Certifications & Compliance
ISO 9001
Quality Management System
ISO 14001
Environmental Management
SGS Audited
Third-Party Facility Audit
IAF MLA
International Accreditation
REACH SVHC
EU Chemical Compliance
RoHS
Hazardous Substance Restriction
GB/T 23443-2024
Chinese National Standard
Japan Food Sanitation
Food Contact Safety Passed
10 / CAPABILITIES
Group Manufacturing Capabilities
Aluminum Veneer & Panel Factory
- Single-skin aluminum panel (2.0-4.0mm)
- PVDF fluorocarbon coating
- Wood-grain sublimation transfer
- Perforated panels (custom patterns)
- Honeycomb composite panels
- Custom shaping, bending, welding
Aluminum Profile Processing
- Electrolysis surface treatment
- PVDF coating on profiles
- Wood-texture thermal transfer
- Anodizing (profiles & extrusions)
- Powder coating (electrostatic)
- Custom extrusion shapes
Coil Surface Treatments
- Continuous anodizing (primary product)
- Color coating (PE / PVDF on coil)
- Lamination (protective PE film)
- Embossing (stucco, diamond, ribbed)
- Slitting & cut-to-length service
- Brushing, polishing, sandblasting
11 / APPLICATIONS
Typical Industries
| Industry | Application | Alloys |
|---|---|---|
| Architecture | Facade cladding, curtain walls, roofing | 5005, 3003, 1100 |
| Interior Design | Ceiling panels, wall panels, trim | 1050, 1060, 5005 |
| Appliances | Housings, panels, heat exchangers | 3003, 5052 |
| Marine / Coastal | Boat fittings, dock structures, humid env. | 5052, 5754, 5083 |
| Electronics | EMI shielding, enclosures, heat sinks | 1060, 6061 |
| Signage & Display | Nameplates, directional signs, displays | 1050, 1060, 1085 |
| Transportation | Vehicle body, luggage, rail interiors | 5754, 5052, 5083 |
| Medical / Food | Equipment housings, food contact | 1060, 1090, 5052 |
| Battery / Energy | Battery casings, busbars | 1060, 3003, 1070 |
12 / RESOURCES
Related Technical Resources
Full technical library: www.albei.cc/technical/ · Free samples: sales@albei.cc